Crusher and Screen

JAW CRUSHER

Description

Jaw crusher is designed to crush hard, tough and abrasive material. The principle of crushing involves compression of material against metal jaw plates and minimizes the rubbing action, thereby increasing the life of jaw plates. The mechanical pressure is achieved by the two Jaws of the crusher, of which one is fixed while the other moves back and forth relative to it. Hind Equipments Jaw Crushers are engineered to be as simple and maintenance free as far as possible. Everything comes apart and goes back together in an easy logical sequence.

Features

Easy maintenance.
A steep angle of toggle plate to amplify the stroke resulting in a long and linear stroke at the discharge.
A high reduction ratio maintaining great productivity.
Expertise in casting designs and quality to provide strength and higher life.

Basic Specification

Dimensions	Dimensions As Per Specification / requirement
Frame Material	The body of Jaw Crusher is fabricated from mild steel plates of adequate thickness. The complete frame is stress relieved for trouble free performance.
MOC of Jaw/ Blades	Manganese Steel
V- Pulley MOC	CI Casting
Type	Single Toggle
Capacity	0.5 TPH / 1 TPH / 1.5 TPH / 2TPH
Mounting Type	Floor Mounting
Feed Hopper	Batch Feeding
Motor	Make - ABB/Siemens/Crompton/GE(Best ISI marked) as per requirement
Safety	Overload Protection, Guards for rotating parts

Optional
Hind Equipments Jaw Crusher unit is delivered with Body, Frame, Mounting Base, Motor etc	As per specification / requirement

PLAIN / TOOTHED ROLL CRUSHER

Description

Toothed Roll Crushers are used for crushing the frible and brittle materials like Coal, Coke, Sinter (hot and cold), Clay Earth, Chalk, Salt Limestone etc.

A toothed roll crusher crushes using compression, with two rolls rotating about a shaft, towards the gap between the rolls. The gap between the rolls is set to the size of product desired.

The standard roll crusher has independent belt drives from two motors, one motor for each roll. This arrangement eliminates the need for an intermediate drive transmitting device resulting in less space utilization and reducing the no-load power loss.

Features

Ideal for secondary crushing.
Easy maintenance.
Unique design that operates two rolls with single drive.
A high reduction ratio maintaining great productivity.

Expertise in casting designs and quality to provide strength and higher life.

Basic Specification

Dimensions	Dimensions As Per Specification / requirement
Frame Material	The body of Plain / Toothed Roll Crusher is fabricated from mild steel plates of adequate thickness. The complete frame is stress relieved for trouble free performance.
Roller Material	Manganese Steel
Capacity	0.5 TPH / 0.7 TPH / 1 TPH / 2 TPH
Rolls Gap Adjustment	The gap between the roll can be adjusted by a spring loaded screw
Feed Hopper	Batch Feeding
Mounting Type	Floor Mounting
Safety	Overload Protection, Guards for rotating parts
Motor	Suitable capacity as per requirement (Best ISI marked) Make - ABB/Siemens/Crompton/GE

Optional
Hind Equipments Plain / Toothed Roll Crushers unit is delivered with Body, Frame, Mounting Base, Motor etc.	As per specification / requirement

Multi Deck Vibrating Screen

Description

Multi deck vibrating screen is to separate the mixture into a variety of specifications with different particle sizes. Simply put, the multi deck vibrating screen has multi deck screens. According to the mesh size of the screen, the mixture is separated into finished products with different fineness.

Multi deck vibrating screen uses the vibration motor to excite the vibration power source, so that the material is thrown up on the screen. At the same time, it moves in a straight line. The material enters the feeding port of the vibrating screen from the feeder evenly, and passes through the multi deck screen. Various specifications of oversize and undersize are produced and discharged from their respective outlets.

Features

Easy maintenance.
The Multi deck vibrating screen is equipped with a simple clamping system that allows the operator to easily clean the screen when required.
It can realize a variety of specifications of materials in one feeding, saving time and effort and saving workshop expenses.

Basic Specification

Dimensions	Dimensions As Per Specification / requirement
Outer Body Material	Mild steel
Sieves MOC	Stainless Steel/Mild steel
Sieves	Woven wire mesh/Punched hole plate
Type	Reciprocating motion/shaking/vibration
Feed Size	According to the sieves
Capacity	0.5 TPH / 0.7 TPH / 1 TPH / 2 TPH
Mounting Type	Floor Mounting
Safety	Overload Protection, Guards for rotating parts
Motor	Suitable capacity as per requirement (Best ISI marked) Make - ABB

Optional
Hind Equipments Plain / Multi deck screen unit is delivered with Body, Frame, Mounting Base, Motor etc.	As per specification / requirement